Test Basic Network Connectivity - Part 2
In this lab, you’ll practice VLAN tagging and providing network services. When you’re finished, you’ll have tested network-related services and connectivity.
Terms and conditions apply.
Challenge
Get Started in the Lab Environment
Here are the initial instructions and explanation of the lab environment. Read this while your environment is busy creating itself from nothing. Yes, this violates physics; we know. How fun!
Challenge
Test IPv4 and IPv6 Connectivity
To begin this lab, you’ll practice setting up bridges using Open vSwitch. When you’re finished, you’ll have tested network connectivity using IPv4 and IPv6.
Challenge
Test Connectivity and Use VLAN Tags
You’ll now practice VLAN tagging, will test network connectivity, and will perform troubleshooting using tcpdump.
Challenge
Enable and Test DHCP
For this final challenge, you’ll set up dnsmasq, and when done, you’ll have enabled DHCP.
Provided environment for hands-on practice
We will provide the credentials and environment necessary for you to practice right within your browser.
Guided walkthrough
Follow along with the author’s guided walkthrough and build something new in your provided environment!
Did you know?
On average, you retain 75% more of your learning if you get time for practice.
Recommended prerequisites
- Some Linux CLI exposure.
- Familiarity with OSI Layer 2 concepts, such as MAC address and Layer 2 ports
- Knowledge of network namespaces
- Familiarity with Layer 3 concepts, such as IP addresses
- Familiarity with CIDRs, VLANs, and DHCP