Deploy Azure VNETs and Subnets with Terraform

1. Open the CLI.
2. Select Bash at the prompt.
3. Click Show Advanced Settings.
4. Set the cloudshell region to the same location as the resource group.
5. Select the existing Resource Group and select Use Existing for the Storage Account.
6. In the File share section, choose the Create new radio button and enter console.
7. Click the Attach Storage button.
8. Once the command prompt is initialized, proceed to Task 2.

To complete this exercise, please make sure you've completed Task 1 before completing the following:

1. Use the code block found in the Additional Information and Resources section to create a lab.tf file and upload it to the CLI.
2. In the (resource "azurerm_storage_account" "lab") declaration, you'll need to edit the resource_group_name value with the name generated by the lab. Additionally, you'll need to enter a unique name for the storage account that will be used for the file share. The "provider" statement has been added to the code, so you won't need to create a main.tf file to deploy the storage account.
3. Once the file has been uploaded, run terraform init.
4. Run terraform plan and review the output to confirm that Terraform will create the desired resource. Green plus signs will indicate the resources that need to be added.
5. Run terraform apply, answering yes to the prompt to continue.
6. Once Terraform completes the deployment, check the Azure Portal to confirm.

You're done! Go ahead and shut down the lab.